Malleable iron, used for the connection of polyethylene pipe to steel pipe where a screwed end is available. Malleable iron, using Flexgrip rubber joints and appropriate inserts for the rapid connection of polyethylene pipes. Part numbers shown opposite are for fittings without antishear sleeve retention nuts. If anti-shear nuts are required on Rc to PE fittings please contact Sales Office +44 (0)1473 277300. Finish = Hot Dipped Galvanized (unless otherwise stated) * Finish = Uncoated

Part No. Size (Pipe x Thread) For Use With Pipe
CG0023 Rc1/2" x 1/2" Locking Gas Steel
CG0024 Rc3/4" x 3/4" Locking Gas Steel
CG0026* Rc1.1/4" x 1.1/4" Locking Gas Steel
CG0027 Rc1.1/2" x 1.1/2" Locking Gas Steel
CG0028 Rc2" x 2" Locking Gas Steel
CG0029 Rc1/2" x 20mm SDR9 Locking Gas PE80
CG0030 Rc3/4" x 25mm SDR11 Locking Gas PE80
CG0059 Rc3/4" x 25mm SDR11 Locking Gas PE80
CG0031 Rc1" x 32mm SDR11 Locking Gas PE80
CG0060 Rc1" x 32mm SDR11 Locking Gas PE80
CG0035 Rc1.1/4" x 40mm SDR11 Locking Gas PE80
CG0032 Rc1.1/2" x 50mm SDR11 Locking Gas PE80
CG0033 Rc2" x 63mm SDR11 Locking Gas PE80
CG0063 Rc2" x 63mm SDR11 Locking Gas PE80